The Effect of Teaching Factory Implementation on The Competence and Readiness to Work of Students of the Catering Service Study Program at SMKN 2 Mojokerto

Tri Wahyuni Indah Permata, Luthfiyah Nurlaela, Rita Ismawati, Tri Rijanto

Abstract


This study aims to analyze the effect of implementing the teaching factory on readiness to work through the competence of students. This research was conducted at SMKN 2 Mojokerto. This research is an ex-post facto research. The population of this study were students of class XI and class XII of the catering service program at SMKN 2 Mojokerto, totaling 193 students. The research sampling technique was simple random sampling and calculated using the Slovin formula, so that the number of research samples was 130 students. The data analysis technique used path analysis. Research data collection uses a questionnaire instrument on the variables of teaching factory implementation and readiness to work, while for competence using tests and observation sheets. Before being distributed to research respondents, a validation test was first conducted on each research instrument. In line with the objectives, the results of the study show that: (1) the implementation of the teaching factory has a positive effect on the competence of students at SMKN 2 Mojokerto; (2) The implementation of the teaching factory has a positive effect on the readiness to work of the students at SMKN 2 Mojokerto; (3) The competence of students has a positive effect on the readiness to work of students at SMKN 2 Mojokerto; and (4) the implementation of the teaching factory has a positive effect on the readiness to work of students at SMKN 2 Mojokerto through the competence of students.


Keywords


implementation of teaching factory; competence; readiness to work; pastries production

Full Text:

PDF

References


Alimudin, I. A., Permana, T., & Sriyono, S. (2019). Studi Kesiapan Kerja Peserta Didik Smk Untuk Bekerja Di Industri Perbaikan Bodi Otomotif. Journal of Mechanical Engineering Education, 5(2), 191. https://doi.org/10.17509/jmee.v5i2.15187

Asriati, N., Sulistyarini, Ulfah, M., & Purwaningsih, E. (2017). Pengembangan Model Pembelajaran Teaching Factory 6M Menghadapi Revolusi Industri Keempat Di SMK Negeri 6 Pontianak. Jurnal Pendidikan Ekonomi, 3(2), 1–18.

Aziz, F., Nurjanah, F., & Sari, D. P. (2017). Aktualisasi TTB (Teori Taksonomi Bloom) Melalui Drama Kepahlawanan Guna Penanaman Pendidikan Karakter Pada Peserta Didik. FKIP E-Proceeding PBSI Universitas Jember, 715–724.

Caballero, C. L., Walker, A., & Fuller-Tyszkiewicz, M. (2011). The Work Readiness Scale (WRS): Developing a measure to assess work readiness in college graduates. Journal of Teaching and Learning for Graduate Employability, 2(1), 41–54. https://doi.org/10.21153/jtlge2011vol2no1art552

Cahyani, D. R. (2019). Daya Saing Global Turun, Sri Mulyani: Karena Kualitas SDM Rendah. Retrieved July 1, 2021, from Tempo website: https://bisnis.tempo.co/read/1258628/daya-saing-global-turun-sri-mulyani-karena-kualitas-sdm-rendah

Daulay, H. (2019). Pendidikan Islam di Indonesia Historis dan Eksistensinya. Yogyakarta: Kencana.

Eliyani, C., Yanto, H., & Sunarto. (2016). Determinan Kesiapan Kerja Siswa SMK Kelas XII Kompetensi Keahlian Akuntansi Di Kota Semarang. Journal of Economic Education, 5(1), 22–30.

Fitrihana. (2017). Model Bisnis Kanvas Untuk Mengembangkan Teaching Factory Di Smk Tata Busana Guna Business Model Canvas To Developing Teaching Factory in Fashion Design Vocational High School. Jurnal Taman Vokasi, 5(2), 212–218.

Gozali, G., Dardiri, A., & Soekopitojo, S. (2018). Penerapan Teaching Factory Jasa Boga untuk Meningkatkan Kompetensi Entrepreneur Siswa Sekolah Menengah Kejuruan. JSHP ( Jurnal Sosial Humaniora Dan Pendidikan), 2(1), 46. https://doi.org/10.32487/jshp.v2i1.264

Handayani, K. S., Mundilarno, M., & Mariah, S. (2018). Implementasi Manajemen Teaching Factory Di Prodi Kriya Kulit SMKN 1 Kalasan. Media Manajemen Pendidikan, 1(1), 122. https://doi.org/10.30738/mmp.v1i1.2880

Hersey, P., & Blanchard, K. (1996). Great ideas revisited: Revisiting the life-cycle theory of leadership. Training & Development, 50(1), 42–47.

Hooghiemstra, T. (1992). Integrated management of human resources. Competency Based Human Resource Management, 17–46.

Hoque, M. E. (2016). Three Domains of Learning: Cognitive, Affective and Psychomotor. The Journal of EFL Education and Research, 2(February), 2520–5897. Retrieved from www.edrc-jefler.org

Kurniawan, R. (2017). Pengaruh Penerapan Model Pembelajaran Teaching Factory 6 Langkah (Tf-6M) Dan Prestasi Belajar Kewirausahaan Terhadap Minat Wirausaha. Innovation of Vocational Technology Education, 10(1), 57–66. https://doi.org/10.17509/invotec.v10i1.5092

Letina, A. (2020). Development of students’ learning to learn competence in primary science. Education Sciences, 10(11), 1–14. https://doi.org/10.3390/educsci10110325

Makki, B. I., Javaid, M. U., & Bano, S. (2016). Level of Work Readiness Skills, Career Self-Efficacy and Career Exploration of Engineering Students. NFC-IEFR Journal of Engineering and Scientific Research, 4(1), 91–96. https://doi.org/10.24081/nijesr.2016.1.0017

Muslim, S. (2019). the Implementation Teaching Factory and Implications on the Preparation of Candidates for Vocational High School Teachers. Humanities & Social Sciences Reviews, 7(3), 323–330. https://doi.org/10.18510/hssr.2019.7348

Muspawi, M., & Lestari, A. (2020). Membangun Kesiapan Kerja Calon Tenaga Kerja. Jurnal Literasiologi, 4(1), 111–117. https://doi.org/10.1134/s0514749219040037

Pangastuti, U., & Khafid, M. (2019). Peran Kematangan Karir dalam Memediasi Kompetensi Kejuruan dan Efikasi Diri terhadap Kesiapan Kerja Siswa. Economic Education Analysis Journal, 8(2), 485–500. https://doi.org/10.15294/eeaj.v8i2.31496

Parry, S. B. (1996). Just What Is a Competency?(And Why Should You Care?). Training, 35(6), 58.

Purnawan, P., Santosa, B., & Kurniawan, A. (2020). Automotive Vocational High School: How Career Guidance and Parents Support Impact the Students’ Work Readiness. Journal of Vocational Education Studies, 3(1), 61. https://doi.org/10.12928/joves.v3i1.2142

Putri, D. M., Isnandar, & Handayani, A. N. (2017). Overview Pelaksanaan Teaching Factory Terhadap Kesiapan Kerja Siswa SMK Memasuki Dunia Industri. In Seminar Nasional Sistem Informasi.

Ramli, R. R. (2020). Jumlah Pengangguran Terus Bertambah, Paling Banyak Lulusan SMK.

Sagita, M. P., Hami, A. El, & Hinduan, Z. R. (2020). Development of Indonesian Work Readiness Scale on Fresh Graduate in Indonesia. Jurnal Psikologi, 19(3), 297–314. https://doi.org/10.14710/jp.19.3.297-314

Said, U. (2019). Inovasi Kebijakan Pendidikan Kejuruan Berbasis Entrepreneur. Sidoarjo: Zifatama Jawara.

Siswanto, I. (2011). Pelaksanaan Teaching Factory untuk Meningkatkan Kompetensi dan Jiwa Kewirausahaan Siswa Sekolah Menengah Kejuruan. In Seminar Nasional 2011 “Wonderfull Indonesia.”

Spencer, Jr., L. M., & Spencer, S. M. (1993). Competency at work: Model for superior performance. New Jersey: John Wiley & Sons.

Sugiarti, Y., Maryati, M., & Azizah, D. N. (2018). Pengaruh Pelaksanaan Teaching Factory Terhadap Uji Kompetensi Praktik Siswa SMKN 1 Kuningan. Edufortech, 3(2), 85–92.

Sukardi, H. M. (2021). Metodologi Penelitian Pendidikan: Kompetensi dan Praktiknya. Jakarta: Bumi Aksara.

Sutinah, C. (2020). Pengembangan Karakter Kebangsaan dan Karakter Wirausaha Melalui Implementasi Model Pembelajaran Teaching Factory 6 Langkah (TF-6M). Pasuruan: Qiara Media.

Widiatna, A. D. (2019). Teaching Factory: Arah Baru Manajemen Sekolah Menengah Kejuruan di Indonesia. Jakarta: Pustaka Kaji.

Widihastuti. (2007). Pencapaian Standar Kompetensi Siswa SMK Negeri Program Keahlian Tata Busana Di Kota Yogyakarta Dalam Pembelajaran Dengan KBK. Jurnal Penelitian Dan Evaluasi Pendidikan, 10(2), 268–278.

Wijoyo, H. (2021). Edupreneurship. Solok: CV Insan Cendekia Mandiri.

Zutiasari, I., Rahayu, W. P., Martha, J. A., & Zumroh, S. (2021). Integrasi Pendidikan Bisnis dengan Teaching Factory dan Pengaruhnya Terhadap kesiapan Bekerja Siswa SMK. Jurnal Inovasi Pendidikan Ekonomi, 11(1), 21–32.




DOI: https://doi.org/10.29103/ijevs.v3i3.5412

Article Metrics

 Abstract Views : 464 times
 PDF Downloaded : 185 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Tri Wahyuni Indah Permata, Luthfiyah Nurlaela, Rita Ismawati, Tri Rijanto