Analysis of Technical Loss Calculation Using Load Curve Approach on 20 kV Distribution Network

Rizky Rahmat Maulana; S Salahuddin; E Ezwarsyah; Baharuddin Ismail; Ashish Shrestha; Dhiraj Vijayrao Astonkar

doi:10.29103/jreece.v1i2.5238

Analysis of Technical Loss Calculation Using Load Curve Approach on 20 kV Distribution Network

Rizky Rahmat Maulana, S Salahuddin, E Ezwarsyah, Baharuddin Ismail, Ashish Shrestha, Dhiraj Vijayrao Astonkar

Abstract

Energy loss (losses) is the loss of a certain amount of energy generated when it is distributed to consumers so that it affects the profitability of the company concerned. The size of the losses from an electric power system shows the level of efficiency of the system, the lower the percentage of losses that occur the more efficient the system. Energy losses in the distribution network are generally divided into two, namely technical and non-technical losses. The calculation of technical losses in the 20 KV medium distribution network of PT PLN (Persero) Ulp Matang Glumpang Dua is carried out using the load curve approach method and using the help of the Microsoft Exel program, while the technical losses calculated are technical losses on the Medium Voltage Network and Distribution Transformer. From the results of the analysis of the calculation of technical losses in 2020, the total technical loss value at MG-01 Matang City is in the range of 13.8% to 20.8% which consists of the average technical loss in the Medium Voltage Network feeder of 0.02%. and the loss of Distribution Transformer by 17.6%.

Keywords

technical loss; distribution system;

Full Text:

PDF

References

Zuhal, Dasar Teknik Tenaga Listrik dan Elektronika daya, Jakarta: Gramedia, 2004.

Z. Arifin, Panduan Pengendalian Susut, Bandung: PT PLN (Persero), 2007.

A. Handoyo, Analisa Perhitungan Susut Teknik pada PT. PLN (Persero) UPJ Semarang Tengah, pp. 1-7, 2005.

W. S. dan A. Akbar, “Jurnal Sains dan Teknologi EMAS,” Perhitungan Susut Daya pada Sistem DIstribusi Tegangan Menengah Saluran Udara dan Kabel, Vol. 17, No.3, pp. 169-182, 2017.

B. P. Putra Purba dan E. Warman, Analisa Perhitungan Susut Teknis dengan Pendekatan Kurva Beban pada Jaringan Distribusi PT PLN (Persero) Rayon Medan Kota, vol. VOL. 6 NO.2, pp. 60-64, 2014.

D. A. S dan . E. Ervianto, Analisa Perhitungan Susut Daya dan Energi dengan Pendekatan Kurva Beban pada Jaringan Distribusi PT. PLN (Persero) Area Pekanbaru, vol. Volume 3 No.2, pp. 1-6, 2016.

H. D. Dalam, “Analisa Susut Energi pada Sistem Jaringan Distribusi di PT. PLN APJ Yogyakarta UPJ Wonosari Unit Semanu,” dalam Seminar Nasional Informatika 2013 (semnasIF 2013) UPN "Veteran", Yogyakarta, 2013.

“SPLN 50. Spesifikasi Transformator Distribusi,” 1982.

Shadri, “Analisa Perhitungan Susut Teknis dengan Pendekatan Kurva Beban pada Jaringan Distribusi PT PLN (Persero) Rayon Bireuen,” Tugas Akhir pada Jurusan Teknik Elektro Universitas Malikussaleh, Lhokseumawe, 2018.

Muhammad Taufik Akbar, “Analisa Perhitungan Susut Teknis dengan MetodePendekatan Kurva Beban pada Jaringan Distribusi PT PLN (Persero) Rayon Gandapura,” Tugas Akhir pada Jurusan Teknik Elektro Universitas Malikussaleh, Lhokseumawe, 2019.

DOI: https://doi.org/10.29103/jreece.v1i2.5238