Arduino Mega Based System Design for Sequence and Phase Difference Detection of Three-Phase Systems

I Made Ari Nrartha; Ahmad Sandi Yayan Saputra; Supriono Supriono; Arnawan Hasibuan; M Sayuti; Waleed Khalid Ahmed Al-Ani

doi:10.29103/jreece.v2i1.6889

Arduino Mega Based System Design for Sequence and Phase Difference Detection of Three-Phase Systems

I Made Ari Nrartha, Ahmad Sandi Yayan Saputra, Supriono Supriono, Arnawan Hasibuan, M Sayuti, Waleed Khalid Ahmed Al-Ani

Abstract

In a three-phase system, the difference in the angle between the phases and the phase sequence of the system is very important to ensure the system functions normally and does not cause damage to the three-phase equipment connected to the system. Trigonometric formulas in multiphase systems are used to obtain the angle difference between the phases and the sequence of phases in the system. The trigonometric formula was tested in a simulation using MATLAB software, then applied to an Arduino Mega-based system. In the simulation, the data are two voltages vs. time with a certain phase angle difference, then using the trigonometric formula in the MATLAB program, the data is recovered from the phase angle difference and the direction of rotation of the two voltages. Based on the valid MATLAB simulation test results, the program algorithm is embedded in an Arduino Mega-based system equipped with 2 voltage sensors and a 2.4-inch TFT LCD. The Arduino Mega-based system has succeeded in detecting and visualizing in the form of a graph the angle difference between the phases and the direction of rotation of the three-phase system.

Keywords

arduino mega; three-phase system; phase sequence; phase difference;

Full Text:

PDF

References

Ben. (2020). How to Reverse a Three Phase Motor. https://learnelectricalmaintenance.com/how-reverse-three-phase-motor/

Djamel, O., Dhaouadi, G., Youcef, S., & Mahmoud, M. (2019). Hardware Implementation of Digital PID Controller for DC–DC Boost Converter. 2019 4th International Conference on Power Electronics and Their Applications (ICPEA), 1–4. https://doi.org/10.1109/ICPEA1.2019.8911129

Jaiswal, O., & Chaubisa, D. (2017). Arduino mega and IOT based intelligent energy meter (IEM) to increase efficiency and accuracy in current billing methodology. 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS), 1901–1904. https://doi.org/10.1109/ICECDS.2017.8389780

Kusriyanto, M., & Putra, A. A. (2018). Weather Station Design Using IoT Platform Based on Arduino Mega. 2018 International Symposium on Electronics and Smart Devices (ISESD), 1–4. https://doi.org/10.1109/ISESD.2018.8605456

Kusriyanto, M., & Putra, B. D. (2016). Smart home using local area network (LAN) based arduino mega 2560. 2016 2nd International Conference on Wireless and Telematics (ICWT), 127–131. https://doi.org/10.1109/ICWT.2016.7870866

Mishra, J., Das, S., Kumar, D., & Pattnaik, M. (2019). Performance Comparison of P&O and INC MPPT Algorithm for a Stand-alone PV System. 2019 Innovations in Power and Advanced Computing Technologies (i-PACT), 1, 1–5. https://doi.org/10.1109/i-PACT44901.2019.8960005

Naaman, F., Zakaria, F., Zaylaa, A., Khalil, M., & Mechref, K. (2021). Automatic segmentation of uterine contractions in EHG signals: Hardware implementation with Raspberry Pi and Arduino Mega. 2021 Sixth International Conference on Advances in Biomedical Engineering (ICABME), 15–18. https://doi.org/10.1109/ICABME53305.2021.9604840

Nabil, O., Bachir, B., & ALLAG, A. (2018). Implementation of a new MPPT Technique for PV systems using a Boost Converter driven by Arduino MEGA. 2018 International Conference on Communications and Electrical Engineering (ICCEE), 1–5. https://doi.org/10.1109/CCEE.2018.8634503

Nrartha, I. M. A., Muljono, A. B., Ginarsa, I. M., Sasongko, S. M. Al, & Citarsa, I. B. F. (2018). Smart Energy Meter for Electric Vehicle Based on Bluetooth and GSM Technology. 2018 International Conference on Smart Green Technology in Electrical and Information Systems (ICSGTEIS), 7–12. https://doi.org/10.1109/ICSGTEIS.2018.8709139

Teja, R. (2021). Synchronization of Generators. https://www.electronicshub.org/synchronization-of-generators/

Vlad, M., Popov, P., & Vasile, D. (2020). Simulation of Arduino Mega 2560 board controlling a variable frequency converter driving a BLDC motor. 2020 7th International Conference on Energy Efficiency and Agricultural Engineering (EE&AE), 1–4. https://doi.org/10.1109/EEAE49144.2020.9278996

DOI: https://doi.org/10.29103/jreece.v2i1.6889