Design of Midi Drum Controller Using Piezoelectric and Arduino-Based TCRT5000 Sensor to Facilitate Sound Engineer Performance in the Music Industry

Mirza Maulana; Kartika Kartika; Asran Asran; Misbahul Jannah; Arnawan Hasibuan; M Mursalin; Waleed Khalid Ahmed Al-Ani; Muzamir Isa

doi:10.29103/jreece.v3i2.11743

Design of Midi Drum Controller Using Piezoelectric and Arduino-Based TCRT5000 Sensor to Facilitate Sound Engineer Performance in the Music Industry

Mirza Maulana, Kartika Kartika, Asran Asran, Misbahul Jannah, Arnawan Hasibuan, M Mursalin, Waleed Khalid Ahmed Al-Ani, Muzamir Isa

Abstract

This study discusses the Midi Drum Controller using the Arduino Mega which has many analog pins making it suitable for producing complete drum pads as well as piezoelectricity which is used to detect vibrations when the drum pad is beaten, as well as the Tcrt5000 sensor which is used to control the hi-hat so that it can move. from the sound of an open hi-hat to a closed hi-hat. The results of this study indicate that piezoelectricity can detect vibrations and dynamics of strong and weak drum beats and send the game to midi-based virtual drum applications. The Tcrt5000 sensor used can also work well, judging by the sound it produces and the data sent when the Tcrt5000 sensor is on and off.

Keywords

Midi Controller; Drum Electric; Piezoelectric; Tcrt5000

Full Text:

PDF

References

Fasha, F. A. (2021). Perancangan Octapad Drum Elektronik 8 Chanel Menggunkan Multiplexer Berbasis Arduino Uno. Ammer: Journal Of Academic & Multidicipline Research, 01, 68–72.

Gimeno León, M. (2020). Design of a midi controller and representation of spectral analysis. Universitat Politècnica de Catalunya.

Hasibuan, A., Qodri, A., Isa, M., & others. (2021). Temperature Monitoring System using Arduino Uno and Smartphone Application. Bulletin of Computer Science and Electrical Engineering, 2(2).

Huber, D. M. (2007). The MIDI manual: a practical guide to MIDI in the project studio. Taylor & Francis.

Jaw, F.-S., Tseng, Y.-L., & Jang, J.-K. (2010). Modular design of a long-term portable recorder for physiological signals. Measurement, 43(10), 1363–1368.

Kartika, K., Asran, A., & Harianto, B. (2022). Utilization Of Smartphones As Human Machine Interface Displays For Conveyor Control Systems Logo Based! Web Server. Morfai Journal, 2(2), 255–264.

Majid, M. (2016). Implementasi arduino mega 2560 untuk kontrol miniatur elevator barang otomatis. Universitas Negeri Semarang.

Mina, M., & Kartika, K. (2023). Monitoring System for Levels of Voltage, Current, Temperature, Methane, and Hydrogen in IoT-Based Distribution Transformers. International Journal of Engineering, Science and Information Technology, 3(1), 22–27.

Mnati, M. J., Chisab, R. F., Al-Rawi, A. M., Ali, A. H., & den Bossche, A. (2021). An open-source non-contact thermometer using low-cost electronic components. HardwareX, 9, e00183.

Mowaviq, M. I., Junaidi, A., & Purwanto, S. (2018). Lantai Permanen Energi Listrik Menggunakan Piezoelektrik. Energi & Kelistrikan, 10(2), 112–118.

Muradi, R., & Kartika, K. (2023). Fish Dryer With Temperature Control Using the Fuzzy Logic Method. International Journal of Engineering, Science and Information Technology, 3(1), 1–8.

Nabawi, & I. (2019). Pengembangan Sistem Pengaturan Parkir Berbasis Radio Frequency Identification (Rfid)Sebagai Media Pembelajaran Mata Kuliah Praktik Mikrokontroler. Universitas Negeri Yogyakarta.

Nasution, E. S., Hasibuan, A., & Rifai, M. (2018). Rancang Bangun Alat Penjemur Terasi Otomatis Berbasis Microcontroler. Jurnal Sistem Informasi, 2(2).

Nasution, S. W., & Kartika, K. (2022). Eggplant Disease Detection Using Yolo Algorithm Telegram Notified. International Journal of Engineering, Science and Information Technology, 2(4), 127–132.

Nrartha, I. M. A., Saputra, A. S. Y., Supriono, S., Hasibuan, A., Sayuti, M., & Al-Ani, W. K. A. (2022). Arduino Mega Based System Design for Sequence and Phase Difference Detection of Three-Phase Systems. Journal of Renewable Energy, Electrical, and Computer Engineering, 2(1), 31–37.

Pan, T., Zhu, Y., Pan, T., & Zhu, Y. (2018). Getting started with Arduino. Designing Embedded Systems with Arduino: A Fundamental Technology for Makers, 3–16.

Parmar, S. J., Zala, M. S., Thaker, I. S., & Solanki, K. M. (2017). Design and Development of Stepper Motor Position Control using Arduino Mega 2560. International Journal of Science Technology and Engineering, 3(09).

Pindrayana, K., Borman, R. I., Prasetyo, B., & Samsugi, S. (2018). Prototipe Pemandu Parkir Mobil Dengan Output Suara Manusia Mengunakan Mikrokontroler Arduino Uno. CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, 2(2).

Pitriyanti, L., Saragih, Y., & Latifa, U. (2022). Implementasi Modul Infrared Pada Rancang Bangun Smart Detection For Queue Otomatic Berbasis IOT. Power Elektronik: Jurnal Orang Elektro, 11(2), 188–193.

Pratama, A. N. (2015). Pengembangan MIDI Controller berbasis microcontroller dengan mekanisme sentuh. Universitas Negeri Yogyakarta.

Sibarani, M. O., & Kartika, K. (2022). Organic Waste Compost Processing Using Arduino-Based Automated Machines. Jurnal Ilmiah Poli Rekayasa, 17(2), 44–49.

Su, Y. P., Sim, L. N., Li, X., Coster, H. G. L., & Chong, T. H. (2021). Anti-fouling piezoelectric PVDF membrane: Effect of morphology on dielectric and piezoelectric properties. Journal of Membrane Science, 620, 118818.

Utama, F. H., Djuriatno, W., & Razak, A. A. (2018). Implementasi Komunikasi MIDI Menggunakan UDP Broadcast. Jurnal Mahasiswa TEUB, 6(7).

Yun, J., Park, J., Ryoo, M., Kitchamsetti, N., Goh, T. S., & Kim, D. (2023). Piezo-triboelectric hybridized nanogenerator embedding MXene based bifunctional conductive filler in polymer matrix for boosting electrical power. Nano Energy, 105, 108018.

Zikri, F., Salahuddin, S., & Jannah, M. (2018). Rancang Bangun Sistem Keamanan Sepeda Motor via Ponsel. Jurnal Energi Elektrik, 7(2), 31–38.

DOI: https://doi.org/10.29103/jreece.v3i2.11743