Comparison of Grounding Resistance Using Grounding Rod Electrodes with Different Fault Current Types in Podzolic Soil at Prabumulih Substation

Dian Eka Putra, Gamaliel PV Pardede, Falupi Kurniawan, Muhammad Willianto Saputra, Rahmawan Sinaga, Andu Rahmanda, Bambang Rudini, Reza Eka Putra, Muhammad Waladun Salis

Abstract


For protection against electric shock in electrical equipment, particularly in control or instrument installations in substation equipment, a quality earthing system is required. The earthing system is also affected by soil resistivity with different soil types. In the equipment grounding system, knowledge of the types of electrodes and the type of soil is required. At the Prabumulih substation, Podzolic soil is required to evaluate the stress distribution that happens in the soil in order to reduce Ground Potential Rise (GPR). In addition to obtaining the economic value of the rod electrode type employed. In this study the resistivity value of the podzolic soil type is very decisive so that the resistivity value of the podzolic soil type at the pre-selection substation land is 150 Ωm.


Keywords


Ground Resistance; Bar Electrodes; Ground Potensial Rise; (GPR);

Full Text:

PDF

References


Adnan, Muhammad et al. 2020. “Effects of Lightning Impulse Front Time on Substation Grounding System Performance.” Indonesian Journal of Electrical Engineering and Computer Science 20(2): 569–74.

Ali, Abdul Wali Abdul et al. 2020. “Investigations on the Performance of Grounding Device with Spike Rods (GDSR) with the Effects of Soil Resistivity and Configurations.” Energies 13(14).

Androvitsaneas, Vasilios P., Katerina D. Damianaki, Christos A. Christodoulou, and Ioannis F. Gonos. 2020. “Effect of Soil Resistivity Measurement on the Safe Design of Grounding Systems.” Energies 13(12).

de Araújo, Anderson R.J. et al. 2021. “Computation of Ground Potential Rise and Grounding Impedance of Simple Arrangement of Electrodes Buried in Frequency-Dependent Stratified Soil.” Electric Power Systems Research 198(May).

Azmi, Aizat, Noor Azlinda Ahmad, Lau Kwan Yiew, and Z. Abdul-Malek. 2019. “The Use of Enhancement Material in Grounding System: A Review.” Indonesian Journal of Electrical Engineering and Computer Science 13(2): 453–60.

Elgayar, Ali et al. 2019. “Power Transmission Lines Electromagnetic Pollution with Consideration of Soil Resistivity.” Telkomnika (Telecommunication Computing Electronics and Control) 17(4): 1985–91.

Faudzi, A. H.M. et al. 2020. “A Study on Copper and Galvanized Grounding Performance Using Palm Oil Fuel Ash as New Additive Material.” Journal of Physics: Conference Series 1432(1).

Ghomi, M. et al. 2021. “Integrated Model of Transmission Tower Surge Impedance and Multilayer Grounding System Based on Full-Wave Approach.” Electric Power Systems Research 198(May): 107355.

Hardi, Surya, Y Tarigan, Hendra Zulkarnaen, and Amawan Hasibuan. 2019. “Influence of Artificial Pollutants on Disc Insulators under Dry and Wet Conditions on Leakage Current and Flashover Voltage.” In 2019 3rd International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), , 174–78.

Hasibuan, Arnawan et al. 2021. “Analisa Sistem Proteksi Internal Dan Eksternal Perangkat SCADA Di Gedung MCS Medan Terhadap Arus Dan Tegangan Lebih Petir.” VOCATECH: Vocational Education and Technology Journal 3(1): 1–10.

Hu, Haize et al. 2021. “A New Design of Substation Grounding Based on Electrolytic Cathodic Protection and on Transfer Corrosion Current.” Electric Power Systems Research 195(November 2019).

IEEE Std 80. 2000. 56 The institute of electrical and electonics engineers Standard 80-2000 Guide for Safety in AC Substation Gorunding.

IEEE Std 81. 2012. 2012 IEEE Std 81-2012 (Revision of IEEE Std 81-1983) - Redline IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System.

Lai, Lai, and Khin Thuzar. “Design Consideration of Electrical Earthing System for High-Rise Building.” : 270–82.

Łukaszewski, Artur, and Łukasz Nogal. 2021. “Influence of Lightning Current Surge Shape and Peak Value on Grounding Parameters.” Bulletin of the Polish Academy of Sciences: Technical Sciences 69(2): 1–8.

Myint, Su Mon, Khin Thidar Hla, and Theint Theint Tun. 2020. “Effective Earthing System of Electrical Power Engineering Department Using Optimal Electrodes.” International Journal of Advanced Technology and Engineering Exploration 7(63): 28–35.

PUIL, 2000. “Persyaratan Umum Instalasi Listrik 2000 (PUIL 2000).” DirJen Ketenagalistrikan 2000(Puil): 1–133.

Putra, Dian Eka et al. 2022. “Earthing Resistance and Poldzolic Soil Resistivity at PT . Perta Samtan Gas Field Extraction Plant Prabumulih.” International Journal of Research In Vocational Studies (IJRVOCAS) 2(3): 66–70.

Putra, Dian Eka, Zainuddin Nawawi, and M Irfan Jambak. 2022a. “Using Copper-Coated Round Rod Electrodes at Various Depths in Freshwater Marshes.” 2(1): 15–26.

Putra, Dian Eka, Zainuddin Nawawi, and Muhammad Irfan Jambak. 2022b. “Earth Resistance and Earth Construction To Interference Currents On Swamp Land.” International Conference on Sciences Development and Technology 2(1): 1–8.

Salam, Md Abdus, Quazi Mehbubar Rahman, Swee Peng Ang, and Fushuan Wen. 2017. “Soil Resistivity and Ground Resistance for Dry and Wet Soil.” Journal of Modern Power Systems and Clean Energy 5(2): 290–97.




DOI: https://doi.org/10.29103/jreece.v3i1.10270

Article Metrics

 Abstract Views : 331 times
 PDF Downloaded : 103 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Dian Eka Putra, Gamaliel PV Pardede, Falupi Falupi Kurniawan, Muhammad Willianto Saputra, Rahmawan Rahmawan Sinaga, Andu Andu Rahmanda, Bambang Bambang Rudini, Reza Eka Putra, Muhammad Waladun Salis

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.