SAFETY AND HEALTH ANALISYS IMPLEMENTATION OF CONSTRUCTION PROJECTS WORK SAFETY IN STUDY ACEH PROVINCY
Abstract
Material losses suffered by the company due to the applied program and appropriate safety management among other things, cessation of work which resulted in reduced production and increased frequency of repair or rehabilitation equipment/supplies. The purpose of this study was to assess the level of understanding, awareness, and the factors and constraints of the implementation of safety management programs work by the company to the contractor. To achieve this end, it is the goal of research is to identify the level of understanding and awareness of the parties to the contractor (contractor) on safety at construction project sites, identify the factors and constraints of the implementation of safety management program at the project site construction work, and to identify risks to safety that occurred construction project location. The research data obtained through a questionnaire about the respondent's profile and project descriptions, safety program implementation checklists, and questionnaires Perceptions of contractor safety programs. The results show a variable level of understanding and awareness of the parties to the contractor (contractor) on safety at construction project sites, the most dominant subvariabel selected respondents is subvariabel "Provision of First Aid boxes Accident Victim (P3K)" with a mean value of 5.000 and variance 0.000 . In the variable patterns of program implementation and management of safety is commonly done by the company to the contractor (contractor) subvariabel "Restore the Operating System on the Safe state" with 4.4462 mean value and variance 0.407. On the identification of variable risks to safety that occurred at the site of construction projects on the implementation of construction works of sub variables "machine, for example engine powerhouse" with a mean value of 4.7846 with 0.172 variant, "The working environment (outside the building, inside buildings, and under ground) "with a mean value of 4.7846 with 0.172 variant," The cut on the surface", "Burns", and “Below members of the body" with a mean value of 4.7846 with variance 0.172, are subvariabel-subvariabel as the most dominant.
Full Text:
PDFReferences
Andi,dan Ratna S. Alifen, dan Aditya Chandra. 2005. Model Persamaan Struktural Pengaruh Budaya Keselamatan Kerja pada Perilaku Pekerja di Proyek Konstruks.
Argama, Rizky. 2006. Kesehatan dan Keselamatan Kerja sebagai Komponen Jamsostek. Makalah. Fakultas Hukum Universitas Indonesia. Jakarta
Endroyo, Bambang. 2006. Peranan Manajemen Keselamatan Kerja dalam Pencegahan Kecelakaan Kerja Konstruksi. Jurnal teknik sipil vol.III no. 1 Januari 2006, Semarang.
Effendi Sanjaya. 2009. Standar Penilaian Pengukuran Kinerja Keselamatan dan Kesehatan Kerja untuk Perlengkapan Keselamatan Kerja dan Lingkungan Kerja Tugas Akhir. Universitas Kristen Petra.Surabaya
Mangkunegara, Prabu Anwar. 2002. Manajemen Keselamatan Dan Kesehatan Kerja di Perusahaan. PT. Remaja Rosdakarya, Bandung.
Narbuko, Chalid. dan Achmadi, A.2004. Metodelogi Penelitian. Bumi Aksara, Jakarta.
Peraturan Menteri Nomor: PER.05/MEN/1996 Tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja. 1996. Jakarta: Departemen Tenaga Kerja RI.
Peraturan LPJK Nomor 11a Tahun 2008 Tentang Registrasi Usaha Jasa Pelaksana Konstruksi. Lembaga Pengembangan Jasa Konstruksi Nasional. Jakarta
Siregar, Harrys. 2003. Peranan Keselamatan Kerja di Tempat Kerja Sebagai Wujud Keberhasilan Perusahaan. Jurnal Teknik Kimia Universitas Sumatra Utara, Medan.
Suliyanto. 2006. Metode Penelitian Bisnis. Penerbit Alfabeta. Bandung
Sutrisno, Hariyanto, dan Robert Hartono. 2006. Studi Implementasi dan Pendapat Kontraktor terhadap Program Keselamatan Kerja pada Proyek Mall di Surabaya. Skripsi. Fakultas Teknik Sipil dan Perencanaan, Universitas Kristen Petra, Surabaya
Suyono, Bambang. 2004. Efektivitas Penerapan Manajemen Keselamatan dan Kesehatan Kerja. Jurnal Fakultas Ekonomi Universitas Negeri Malang, Malang.
Sutjana, I Dewa Putu. 2006. Hambatan Dalam Penerapan Keselamatan Kerja dan Ergonomi di Perusahaan. Makalah Seminar Ergonomi dan Keselamatan Kerja, Surabaya.
Undang-Undang Nomor 1 Tahun 1970 Tentang Keselamatan Kerja.
DOI: https://doi.org/10.29103/sisfo.v3i1.6307
Article Metrics
Abstract Views : 153 timesPDF Downloaded : 16 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 Yasir Amani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Universitas Malikussaleh |
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.