Rancang Bangun Alat Pengiris Bawang Serbaguna

Amay Velda Zulkarnaen; Abubakar Dabet; Muhammad Yusuf; Reza Putra; J Jumadi

doi:10.29103/mjmst.v7i1.12591

Rancang Bangun Alat Pengiris Bawang Serbaguna

Amay Velda Zulkarnaen, Abubakar Dabet, Muhammad Yusuf, Reza Putra, J Jumadi

Abstract

This study aims to obtain the production amount of the slicing process of a multipurpose onion slicer according to the needs of the home industry. This versatile onion slicer uses two ways, namely conventional and unconventional. From the experimental results, the rotation of the cutting disk obtained a speed of 46.05 m / s, the cutting power obtained based on the calculation of 513.9 Watt, smaller than the motor power used. The average working capacity of slicing using an electric motor within 1 hour for shallots, plantains, and cassava is 213 g/min, 590.33 g/min and 474.66 g/min, respectively. While if using the manual method is 125.66 g/min, 128.66 g/min, and 161 g/min. Using a 220 Volt water pump drive engine 0.5 HP 2000 Rpm, which is added to the dimmer to adjust the rotation speed. The frame uses Aluminum with a thickness of 1.2 mm.

Full Text:

PDF

References

Ak Srivastava, Rohrbach RP, dan Georing CE. (1996). Engineering Principles Of Agricultural Machines. American Society Of Agricultural Engineers.

Yafid Effendi, Fajar Danuriyanto. (2019). Rancang Bangun Alat Pengiris Bawang Merah Kapasitas 46 Kg/Jam. Studi Teknik Mesin, 1, 1 – 6

Amrullah, M. S., wijaya, M., dan P, J. (2019). Rancang Bangun Alat Pengiris Bawang Merah (Allium Cepa, L) Semi Mekanis Untuk Memudahkan Penanganan Pasca Panen. 5, 271-276.

Hantje Ponto, Dasar Teknik Listrik, Publisher Deepublish, Yogyakarta, 2018.

Taufiqur Rokhman, Menghitung Torsi dan Daya Mesin pada Motor Bakar. Diakses pada 1 Agustus 2022 dari https://taufiqurrokhman.wordpress.com/2012/01/27/menghitung-torsi-dan-dayamesin-pada-motor-bakar

Sularso. (2013). Dasar Perencanaan dan Pemilihan Elemen Mesin. Bandung: PT. Aka.

Daryanto. (2007). Dasar-dasar teknik mesin. In D. Daryanto, Permesinan (2 ed., Vol. 04, pp. 159 - 160). Jakarta, Jl. Mataram Raya No. 148, Indonesia: PT Rineka Cipta.

Robert L. Mott, Elemen-elemen Mesin dalam Perancangan Mekanis, Andy Yogyakarta, (2009).

Rochim. (1993). Teori dan Teknologi Proses Pemesinan. Bandung: Institut Teknologi Bandung.

Hantje Ponto, Dasar Teknik Listrik, Publisher Deepublish, Yogyakarta, 2018.

Achmad, Z. (2006). Elemen Mesin (2 ed., Vol. 2, pp. 1 - 132). Bandung, Jl. Mengger Girang No. 98, Indonesia: PT Refika Aditama.

Ramadhan, F. Y. (2016). Rancang Bangun Pisau Piringan dan Poros Pada Mesin Pengiris Adonan Kerupuk. Universitas Gunadarma Fakultas Teknologi Industri, 01, 1 - 141.

Zulfahmi, Z., Amani, Y., Rahman, A., & Islami, N. (2021). Alih teknologi mesin chopper blender pakan hijauan guna peningkatan produktivitas peternakan ruminansia masa Pandemi Covid-19. Jurnal Hurriah: Jurnal Evaluasi Pendidikan dan Penelitian, 2(4), 119-127.

Eugene A. Avallone and Theodore Baumister III, eds., Marks Standart) Handbook for Mechanical Engineers, 9th ed. Newyork: McGraw – Hill, 1986

Nasional, B. S. (2005). Mesin Pengiris Umbi - Umbian. BSN.

Wahyu K. Sugandi, Asep Yusuf, dan Ahmad Thoriq. (2017). Rancang Bangun Mesin Pengiris Talas Semir. Jurnal Rekayasa Mesin, 8(2477 - 6041), 67- 73.

DOI: https://doi.org/10.29103/mjmst.v7i1.12591