ANALISIS KELAYAKAN SUBTITUSI BAHAN BAKAR WOOD PELLET (PULAI, PUSPA DAN AKASIA) PADA PROSES CO-FIRING DI PT BUKIT ENERGI SERVIS TERPADU TANJUNG ENIM, SUMATERA SELATAN
DOI:
https://doi.org/10.29103/cejs.v6i4.28717Keywords:
Co-firing, Wood Pellet, Boiler CFB, Efisiensi Boiler, Specific Fuel Consumption, Heat Rate.Abstract
Penerapan co-firing biomassa pada Pembangkit Listrik Tenaga Uap (PLTU) merupakan salah satu upaya untuk mengurangi ketergantungan terhadap bahan bakar fosil sekaligus meningkatkan pemanfaatan energi terbarukan. Penelitian ini bertujuan menganalisis pengaruh penggunaan wood pellet kayu pulai, kayu puspa, dan kayu akasia terhadap kinerja boiler pada PLTU Circulating Fluidized Bed (CFB) PT Bukit Energi Servis Terpadu (PT BEST), serta menentukan jenis wood pellet yang paling optimal. Penelitian menggunakan metode deskriptif kuantitatif dengan memanfaatkan data operasi Distributed Control System (DCS), data analisis proksimat, nilai kalor, dan studi literatur. Parameter yang dianalisis meliputi efisiensi boiler, Specific Fuel Consumption (SFC), Gross Plant Heat Rate (GPHR), Net Plant Heat Rate (NPHR), dan analisis ekonomi. Hasil penelitian menunjukkan bahwa jenis wood pellet berpengaruh terhadap kinerja boiler. Wood pellet kayu akasia menghasilkan efisiensi boiler tertinggi sebesar 80,50%, serta nilai SFC, GPHR, dan NPHR terendah masing-masing sebesar 0,6858 kg/kWh, 3.648,5 kcal/kWh, dan 4.327,1 kcal/kWh. Selain itu, wood pellet kayu akasia memberikan margin operasional bahan bakar tertinggi sebesar Rp95.285.000,00. Dengan demikian, wood pellet kayu akasia merupakan biomassa yang paling layak digunakan sebagai bahan bakar substitusi pada sistem co-firing di PLTU CFB PT BEST karena mampu meningkatkan kinerja termal dan memberikan keuntungan ekonomi.
References
1. C. P. Artemio, N. H. Maginot, C. U. Serafín, F. P. Rahim, R. Q. J. Guadalupe, and C. M. Fermín, “Physical, mechanical and energy characterization of wood pellets obtained from three common tropical species,” PeerJ, vol. 2018, no. 9, pp. 1–16, 2018.
2. P. Basu, Biomass Gasification, Pyrolysis and Torrefaction: Practical Design and Theory, 3rd ed. Academic Press, 2018.
3. Y. C. Dwiaji, “Analisis pengaruh co-firing biomassa terhadap kinerja peralatan boiler PLTU batubara Unit 1 PT XYZ,” Journal of Applied Mechanical Engineering and Renewable Energy, vol. 3, no. 1, pp. 34–40, 2022.
4. M. S. Mat Rasat, M. I. Ahmad, M. H. Mohamad Amini, R. Wahab, P. Elham, M. H. Jamaludin, M. F. Mohd Amin, and N. H. Abdullah, “Preliminary study on properties of small diameter Acacia mangium species as potential biomass energy sources,” Journal of Tropical Resources and Sustainable Science, vol. 4, no. 2, pp. 138–144, 2021.
5. M. J. Moran, H. N. Shapiro, D. D. Boettner, and M. B. Bailey, Fundamentals of Engineering Thermodynamics, 9th ed. John Wiley & Sons, 2018.
6. P. K. Nag, Power Plant Engineering, 4th ed. McGraw-Hill Education, 2017.
7. A. Pambudi, I. Kukmana, and Y. E. Risano, “Pengaruh nilai spesifik konsumsi bahan bakar (SFC) terhadap jumlah pemakaian batubara di PT Bukit Energi Servis Terpadu PLTU Peltar 2×8 MW,” Jurnal Profesi Insinyur Indonesia, vol. 4, no. 2, pp. 45–52, 2023.
8. R. Saidur, E. A. Abdelaziz, A. Demirbas, M. S. Hossain, and S. Mekhilef, “A review on biomass as a fuel for boilers,” Renewable and Sustainable Energy Reviews, vol. 15, no. 5, pp. 2262–2289, 2011.
9. A. Tatiana, R. Avendaño, D. Chavez, L. Banhierl, L. Connor, D. Ghosh, and J. Marshall, “Energy, Power and Transition,” pp. 1–10, n.d.
Downloads
Published
Versions
- 2026-08-15 (3)
- 2026-08-15 (2)
- 2026-08-15 (1)
Issue
Section
License
Copyright (c) 2026 Tri Muhamad Rieski, Leo Altamirando; Sahrul Effendy, Rima Daniar, Ida Febriana

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors retain copyright and grant the journal right of first publication. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
All articles in this journal may be disseminated by listing valid sources, and the article's title should not be omitted. The content of the article is liable to the author.
Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.
In disseminating articles, the author must declare the Chemical Engineering Journal Storage (CEJS) as the first party to publish the article.








