SIMULATION AND OPTIMIZATION OF ENERGY AND DAYLIGHTING PERFORMANCE IN GOVERNMENT DISTRICT OFFICE BUILDING IN THE TROPICS
DOI:
https://doi.org/10.29103/arj.v13i1.26776Keywords:
daylighting, overall thermal transfer value, useful daylight illuminance (UDI), optimization, office buildingAbstract
The increase in energy consumption in buildings, particularly in the government sector, poses a serious challenge in the effort to mitigate climate change. This research aims to analyze and optimize the facade design of the Aceh Utara district office building to improve energy efficiency through an integrative approach between reducing the overall thermal transfer value (OTTV) and utilizing daylighting based on useful daylight illuminance (UDI) metric. The simulation is conducted using Rhinoceros (RH) software integrated with Grasshopper (GH) to evaluate the combination of design variables such as window-to-wall ratio (WWR), depth, and angle of external shading. Validation of the OTTV value refers to the official calculator from the Government Department Public Works and Public Housing (PUPR), while the daylighting simulation utilizes annual climate data to obtain lighting distribution in three categories: insufficient, optimal, and excessive. The research results show that opening and shading optimization strategies can reduce OTTV to below the threshold of 35 W/m² according to SNI 6389:2020, as well as increase the proportion of areas with optimal daylighting. These findings underscore the importance of an integrative approach to energy and daylighting performance in facade design, and demonstrate the significant potential of climate-based daylight simulations to support the achievement of sustainable and energy-efficient government office buildings.
References
[1] D. Hasanah, A. S. Yahya, E. Saputra, and H. Artikel, “Analisa nilai OTTV (overall thermal transfer value) pada bangunan pemerintahan di Kota Lhokseumawe (studi kasus : Kantor Walikota Lhokseumawe),” Etn. J. Ekon. - Tek., vol. 2, no. 10, pp. 966–976, 2023, doi: https://doi.org/10.54543/etnik.v2i10.254.
[2] H. A. Octafiansyah, A. Marwati, and H. F. Wasnadi, “Analisis fasad bangunan itb ahmad dahlan karawaci dengan perhitungan overall thermal transfer value (OTTV),” Rustic J. Arsit., vol. 4, pp. 49–71, 2024.
[3] M. S. Hoesin, “Studi oleh IFC dan green building council indonesia menunjukkan sembilan bangunan gedung hijau menghemat 30 - 80 persen biaya utilitas dibandingkan dengan bangunan pada umumnya,” Internaltional Finance Corporation, 2020.
[4] M. Mukhtar, H. Baharuddin, and R. Mulyadi, “Pengaruh geometri dan window to wall ratio terhadap overall thermal transfer value dan konsumsi energi pendingin bangunan,” Nat. Natl. Acad. J. Archit., vol. 10, no. 1, pp. 15–26, 2023, doi: 10.24252/nature.v10i1a2.
[5] A. A. Pamurti, “Analisa penggunaan energi pada gedung berdasar overall thermal transfer value (OTTV) di kawasan simpang lima Kota Semarang,” G-Tech J. Teknol. Terap., vol. 7, no. 3, pp. 939–948, 2023, doi: 10.33379/gtech.v7i3.2653.
[6] M. Aziz, Muhlasin, and M. Ali, “Analisis perencanaan pencahayaan alami dan buatan gedung fakultas teknik dengan Dialux,” J. Komput. dan Elektro Sains, vol. 3, no. 1, pp. 33–40, 2025, doi: https://doi.org/10.58291/komets.v3i1.341.
[7] Badan Standardisasi Nasional, “SNI 6197:2020 Konservasi energi pada sistem pencahayaan,” Standar Nasional Indonesia. Badan Standardisasi Nasional, p. 45, 2020.
[8] R. A. Mangkuto, A. D. Asri, M. Rohmah, F. X. Soelami, and R. M. Soegijanto, “Revisiting the national standard of daylighting in Indonesia: A study of five daylit spaces in Bandung,” Sol. Energy, vol. 126, pp. 276–290, 2016, doi: https://doi.org/doi.org/10.1016/j.solener.2016.01.022.
[9] Iskandar, N. C. Idham, and Sugini, “Useful daylight illuminance pada rumoh tradisional krong bade aceh dengan metode climate based daylight modeling,” Arsitekno, vol. 10, no. 1, p. 16, 2023, doi: 10.29103/arj.v10i1.10236.
[10] A. Atthaillah and A. Bintoro, “Useful daylight illuminance (UDI) pada ruang belajar sekolah dasar di kawasan urban padat tropis (studi kasus: SD Negeri 2 dan 6 Banda Sakti, Lhokseumawe, Aceh, Indonesia),” Langkau Betang J. Arsit., vol. 6, no. 2, p. 72, Dec. 2019, doi: 10.26418/lantang.v6i2.33940.
[11] E. Brembilla and J. Mardaljevic, “Climate-Based Daylight Modelling for compliance verification: Benchmarking multiple state-of-the-art methods,” Build. Environ., vol. 158, pp. 151–164, Jul. 2019, doi: https://doi.org/10.1016/j.buildenv.2019.04.051.
[12] Kementerian Energi dan Sumber Daya Mineral Republik Indonesia, “Peraturan Menteri Energi dan Sumber Daya Mineral No. 13 Tahun 2012 tentang Penghematan Pemakaian Tenaga Listrik,” Jakarta, 2012.
[13] A. M. Nasution, S. Y. Moerni, and Y. S. Rambe, “Efisiensi energi berkelanjutan: strategi desain dan perhitungan optimalisasi efisiensi energi pada selubung bangunan,” MARKA (Media Arsit. dan Kota) J. Ilm. Penelit., vol. 7, no. 2, pp. 167–182, 2024, doi: https://doi.org/10.33510/marka.2024.7.2.167-182.
[14] C. N. Octarino and H. Feriadi, “Evaluasi kinerja selubung bangunan gedung agape universitas kristen duta wacana yogyakarta,” Langkau Betang J. Arsit., vol. 8, no. 2, p. 86, 2021, doi: 10.26418/lantang.v8i2.45436.
[15] N. T. K. Phuong, Y. C. Chan, C. T. Do, N. A. Tuan, and D. Rinchumphu, “A simulation-based workflow to calculate overall thermal transfer value when implementing daylighting-oriented shading control,” J. Build. Eng., vol. 84, no. 55, p. 108616, 2024, doi: 10.1016/j.jobe.2024.108616.
[16] Badan Standardisasi Nasional, “SNI 6389:2020 Konservasi energi selubung bangunan pada bangunan gedung.” Badan Standardisasi Nasional, 2020.
[17] A. Atthaillah, R. A. Mangkuto, and F. N. Hakim, Desain Bangunan Terintegrasi dengan Metode Parametrik. Bandung: ITB Press, 2021.
[18] Atthaillah, R. A. Mangkuto, and A. Bintoro, “Sensitivity analysis and optimization of facade design to improve daylight performance of tropical classrooms with an adjacent building,” J. Daylighting, vol. 12, no. 1, pp. 235–251, Jun. 2025, doi: 10.15627/jd.2025.13.
[19] Atthaillah, R. A. Mangkuto, M. D. Koerniawan, and B. Yuliarto, “On the Interaction between the Depth and Elevation of External Shading Devices in Tropical Daylit Classrooms with Symmetrical Bilateral Openings,” Buildings, vol. 12, no. 6, 2022, doi: 10.3390/buildings12060818.
[20] R. F. Fela, S. S. Utami, R. A. Mangkuto, and D. J. Suroso, “The effects of orientation, window size, and lighting control to climate-based daylight performance and lighting energy demand on buildings in tropical area,” Build. Simul. Conf. Proc., vol. 2, pp. 1075–1082, 2019, doi: 10.26868/25222708.2019.210677.
[21] R. A. Mangkuto, M. Rohmah, and A. D. Asri, “Design optimization for window size, orientation, and wall reflectance with regard to various daylight metrics and lighting energy demand: a case study of buildings in the tropics,” Appl. Energy, vol. 164, pp. 211–219, 2016, doi: https://doi.org/10.1016/j.apenergy.2015.11.046.
[22] A. Atthaillah and R. A. Mangkuto, “Optimisasi Parametrik Fasad Bilah Horizontal terhadap Pencahayaan Alami dengan Metrik Useful Daylight Illuminance (UDI) di Kota Lhokseumawe,” Nat. Natl. Acad. J. Archit., vol. 7, no. 1, pp. 89–98, Jun. 2020, doi: 10.24252/nature.v7i1a7.
[23] F. N. Hakim, Y. Muhamadinah, Atthaillah, R. A. Mangkuto, and A. S. Sudarsono, “Building Envelope Design Optimization of a Hypothetical Classroom Considering Energy Consumption, Daylighting, and Thermal Comfort: Case Study in Lhokseumawe, Indonesia,” Int. J. Technol., vol. 12, no. 6, pp. 1217–1227, Dec. 2021, doi: https://doi.org/10.14716/ijtech.v12i6.5203.
[24] A. Hayes, “Coefficient of variation: Definition and how to use it,” Investopedia, 2025.
[25] H. A. Saputro, W. F. Mahmudy, and C. Dewi, “Implementasi algoritma genetika untuk optimasi penggunaan lahan pertanian,” J. Mhs. PTIIK Univ. Brawijaya, vol. 5, no. 12, 2015.
[26] Atthaillah, R. A. A. Mangkuto, M. D. Koerniawan, J. L. M. Hensen, and B. Yuliarto, “Optimization of daylighting design using self-shading mechanism in tropical school classrooms with bilateral openings,” J. Daylighting, vol. 9, no. 2, pp. 117–136, 2022, doi: https://dx.doi.org/10.15627/jd.2022.10.
[27] Atthaillah, S. Wijayanti, and S. M. Hassan, “Simulasi desain fasad optimal terhadap pencahayaan alami pada gedung Prodi Arsitektur Universitas Malikussaleh,” EMARA Indones. J. Archit., vol. 4, no. 1, pp. 21–29, Aug. 2018, doi: 10.29080/emara.v4i1.228.
[28] E. J. Effendy, F. N. Hakim, Atthaillah, R. A. Mangkuto, M. D. Koerniawan, and D. Ramadhani, “Daylight optimization in a hypothetical classroom using single-objective optimization methods: Case study in Lhokseumawe, Indonesia,” IOP Conf. Ser. Earth Environ. Sci., vol. 1157, no. 1, p. 12002, Apr. 2023, doi: 10.1088/1755-1315/1157/1/012002.
[29] A. Atthaillah and R. A. Mangkuto, “Optimisasi parametrik fasad bilah horizontal terhadap pencahayaan alami dengan metrik useful daylight illuminance (UDI) di Kota Lhokseumawe,” Nat. Natl. Acad. J. Archit., vol. 7, no. 1, Jun. 2020, doi: 10.24252/nature.v7i1a7.
[30] I. K. Sriwana, N. H. S, A. Suwandi, and R. Rasjidin, “Pengukuran kinerja rantai pasok menggunakan Supply Chain Operations Reference (SCOR) di UD. Ananda,” JISI J. Integr. Sist. Ind., vol. 8, no. 2, 2021, doi: https://doi.org/10.24853/jisi.8.2.13-24.
[31] M. Kamber and J. Han, Data mining: Concepts and techniques. 2006.
[32] Atthaillah, R. A. Mangkuto, M. D. Koerniawan, S. Subramaniam, and B. Yuliarto, “Formulation of climate-based daylighting design prediction model for high performance tropical school classrooms,” Energy Build., p. 113849, 2024, doi: https://doi.org/10.1016/j.enbuild.2023.113849.
[33] M. I. Ayoosu, Y.-W. Lim, P. C. Leng, and O. Moses Idowu, “Daylighting evaluation and optimisation of window to wall ratio for lecture theatre in the tropical climate,” J. Daylighting, vol. 8, no. 1, pp. 20–35, Jan. 2021, doi: 10.15627/jd.2021.2.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Muhammad Rofi, Atthaillah Atthaillah, Erna Muliana, Nik Mohd Faiz Nik Kamrulzaman, Muhammad Iqbal

This work is licensed under a Creative Commons Attribution 4.0 International License.
All the published works are freely available online. However, author(s) hold a copyright under a Creative Commons Attribution 4.0 International License.
Arsitekno uses license CC-BY or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly works.
This license permits anyone to compose, repair, and make derivative creation even for commercial purposes, as long as appropriate credit and proper acknowledgement to the original publication from Jurnal Ilmiah is made to allow users to trace back to the original manuscript and author.
Readers are also granted full access to read and download the published manuscripts, reprint and distribute the manuscript in any medium or format.





